User's Manual

Automation and Drives - SCE

T I A Training Document Page 3 of 25 Module

SEITE:

1. Foreword .............................................................................................................. 4

2. Notes on Using the CPU 314C-2DP ................................................................... 6

2.1 Operator Control of the CPU 31xC..................................................................... 7

2.2 Memory Concept of the CPU 31xC .................................................................... 9

3. Creating the Hardware Configuration for the CPU 314C-2DP......................... 11

4. Writing a STEP 7 Program .................................................................................. 21

5. Testing the STEP 7 Program .............................................................................. 24

The following symbols provide guidance through this module:

Information

Programming

Task example

Notes

Issue date: 02/2008 Programming the CPU 314C-2DP