User's Manual

Automation and Drives - SCE

T I A Training Document Page 4 of 25 Module

1. FOREWORD

In terms of its contents, module A5 belongs to the teaching unit entitled "Basic Principles of STEP

7 Programming'.

Basic Principles of

STEP 7 Programming

2 to 3 days Module A

Industrial Field

Bus Systems

2 to 3 days Module D

Further Functions of

STEP 7 Programming

2 to 3 days Module B

Process

Visualization

2 to 3 days Module F

Progamming

Languages

2 to 3 days Module C

IT Communication

with SIMATIC S7

2 to 3 days Module E

Plant Simulation

with SIMIT SCE

1 to 2 days Module G

Frequency Converter

at SIMATIC S7

2 to 3 da

s Module H

Learning Objective:

In this module, the reader learns how to create a hardware configuration for the CPU 314C-2DP and

how to write and test a STEP 7 program. Based on the steps below, the A5-module explains the

procedure in principle, using a very brief example:

• Setting up a STEP 7 project

• Creating the hardware configuration for the 314C-2DP CPU

• Writing a STEP 7 program

• Testing the program

Requirements:

The following knowledge is a precondition for successful utilization of this module:

• Knowledge in the use of Windows

• Basic principles of PLC programming with STEP 7 (e.g. Module A3 – 'Startup'

PLC Programming with STEP 7)

Foreword Notes Hardware configuration STEP 7 program Testing

Issue date: 02/2008 Programming the CPU 314C-2DP