User's Manual

AT Command Set
MC35_ATC_01_V04.00 Page 128 of 238 02.04.2002
5.4 AT+CMGL List SMS messages from preferred store
Test command
AT+CMGL=?
Response
+CMGL: (list of supported <stat>s) OK
Parameter
See execute command
Execute command
AT+CMGL[=
<stat>]
Parameter
1) If text mode:
<stat> “REC UNREAD” Received unread messages (default)
“REC READ” Received read messages
“STO UNSENT” Stored unsent messages
“STO SENT” Stored sent messages
“ALL” All messages
2) If PDU mode:
<stat> 0 Received unread messages (default)
1 Received read messages
2 Stored unsent messages
3 Stored sent messages
4 All messages
Response
TA returns messages with status value <stat> from message storage <mem1>
to the TE. If status of the message is ‘received unread’, status in the storage
changes to ‘received read’.
Note: If the selected <mem1> can contain different types of SMs (e.g. SMS-
DELIVERs, SMS- SUBMITs, SMS- STATUS-REPORTs and SMS-
COMMANDs), the response may be a mix of the responses of different SM
types. TE application can recognize the response format by examining the
third response parameter.
Response
1) If text mode (+CMGF=1) and command successful:
for SMS- SUBMITs and/or SMS-DELIVERs:
+CMGL: <index>,<stat>,<oa/da>,[<alpha>],[<scts>][,<tooa/toda>,
<length>]<CR><LF><data>[<CR><LF>
+CMGL: <index>,<stat>,<da/oa>,[<alpha>],[<scts>][,<tooa/toda>,
<length>]<CR><LF><data>[...]] OK
for SMS-STATUS-REPORTs:
+CMGL: <index>,<stat>,<fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>,<st>
[<CR><LF>
+CMGL: <index>,<stat>,<fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>,<st>
[...]] OK