User's Manual

AT Command Set
MC35_ATC_01_V04.00 Page 177 of 238 02.04.2002
Dedicated channel:
chann traffic channel number
Note: <chann> = h indicates frequency hopping.
TS timeslot no.
timAdv timing advance in bits
PWR current power level
dBm receiving level in dBm
Q receiving quality (0–7)
ChMod channel mode (S_HR: Half rate, S_FR: Full rate, S_EFR: Enhanced Full
Rate)
Reference
Siemens
Note
• If the radio cell changes during a connection, the parameters LAC, Cell, NCC
BCC, PWR and RXLev of the ‘Serving Cell’ part will not be updated (see also
+CREG, pg 113).
• If the BS supports frequency hopping during a connection, the dedicated chan-
nel (parameter chann) is not stable. This mode is indicated by chann = ‘h’.
• The cell information can be issued in the form of unsolicited result codes (re-
lated to <period>), or it can be queried directly using the Execute command
AT^MONI. In the first case, the ME activates its RING line (Logic “1”) for one
second to send the URC to the connected application. In the second case, the
RING line does not change.