User's Manual

AT Command Set
MC35_ATC_01_V04.00 Page 8 of 238 02.04.2002
0 Version History
This chapter reports modifications and improvements over previous versions of the document.
"AT Command Set" Version MC35-ATC_01_V03.02 => MC35_ATC_01_V04.00
Chapter Page AT command What is new
2.2 14 +++ Chapter revised.
2.5 16
ATD Parameters “G” and “g” for Closed User Group added.
2.17 25 ATO Chapter revised.
4.8 66 AT+CCUG New AT command: Closed User Group.
4.9 67 AT+CCWA New AT command: Call Waiting.
4.19 76 AT+CIND New AT command: Indicator control.
4.21 79 AT+CLCK Under parameter “PS” lock, the following statement
has been removed: “ME may remember numbers of
previously used cards.”
4.25 88 AT+CMER New AT command: Mobile equipment event reporting.
8.2
8.3
176f
178
AT^MONI
At^MONP
Statement regarding RING line revised.
8.19 194 AT^SNFA New AT command: Set or query microphone attenua-
tion
8.36 210 AT^SSDA New AT command: Set Display Availability
9.1.4 218 +CIEV: <text> added to list of URCs
9.2 - 9.3 229f - 231f AT+CCUG,
AT+CCWA,
AT+CMER,
AT^SSDA
AT+CIND
AT^SNFA
Added to Chapter 9.2 (PIN 1 required).
Added to Chapter 9.3 (PIN1 independent)
"AT Command Set" Version MC35-ATC_01_V02.00 => MC35_ATC_01_V03.02
Chapter Page AT command What is new
1.5.2 13 Note regarding sequential order of concatenated commands added.
4.5 61 AT+CBST Command syntax corrected: Parameter <speed> is
mandatory.
4.6 62 AT+CCFC New <class> parameters added.
4.11 69 AT+CFUN SLEEP mode described in greater detail
4.21 79 AT+CLCK New <class> parameters added.
4.35.1 104 AT+CPIN Timing algorithm of incorrect password corrected
4.46 120 AT+CSQ Note added: Realistic BER values can be obtained
only if there is a call in progress.
5.11 142 AT+CPMS Difference between SM, ME and MT storage ex-
plained.
6.1.8 163 AT^SGAUTH New command to specify protocol for PPP authenti-
cation