User manual

AT Command Set
MC35_ATC_01_V05.00 Page 11 of 256 15.07.2002
"AT Command Set" Version MC35-ATC_01_V03.02 => MC35-ATC_01_V04.00
Chapter Page AT command What is new
2.2 19 +++ Chapter revised.
2.5 21
ATD Parameters “G” and “g” for Closed User Group added.
2.17 31 ATO Chapter revised.
4.8 74 AT+CCUG New AT command: Closed User Group.
4.9 75 AT+CCWA New AT command: Call Waiting.
4.19 85 AT+CIND New AT command: Indicator control.
4.21 88 AT+CLCK Under parameter “PS” lock, the following statement
has been removed: “ME may remember numbers of
previously used cards.”
4.26 98 AT+CMER New AT command: Mobile equipment event reporting.
8.2
8.3
186f
188
AT^MONI
At^MONP
Statement regarding RING line revised.
8.19 205 AT^SNFA New AT command: Set or query microphone attenua-
tion
8.39 225 AT^SSDA New AT command: Set Display Availability
9.1.4 234 +CIEV: <text> added to list of URCs
9.2 - 9.3 246f - 248f AT+CCUG,
AT+CCWA,
AT+CMER,
AT^SSDA
AT+CIND
AT^SNFA
Added to Chapter 9.2 (PIN 1 required).
Added to Chapter 9.3 (PIN1 independent)
"AT Command Set" Version MC35-ATC_01_V02.00 => MC35_ATC_01_V03.02
Chapter Page AT command What is new
1.4.2 16 Note regarding sequential order of concatenated commands added.
4.5 69 AT+CBST Command syntax corrected: Parameter <speed> is
mandatory.
4.6 70 AT+CCFC New <class> parameters added.
4.11 78 AT+CFUN SLEEP mode described in greater detail
4.21 88 AT+CLCK New <class> parameters added.
4.35.1 114 AT+CPIN Timing algorithm of incorrect password corrected
4.46 130 AT+CSQ Note added: Realistic BER values can be obtained
only if there is a call in progress.
5.11 152 AT+CPMS Difference between SM, ME and MT storage ex-
plained.
6.1.8 173 AT^SGAUTH New command to specify protocol for PPP authentica-
tion
8.2 186f AT^MONI Channel numbers are now issued in the form of 4-digit
numbers. Therefore, the examples on page 186 have
been updated.
Frequency hopping will now be indicated with “h” (in-
stead of the previously used “0”.