User manual

AT Command Set
MC35_ATC_01_V05.00 Page 152 of 256 15.07.2002
5.11 AT+CPMS Preferred SMS message storage
Test command
AT+CPMS=?
Response
+CPMS: (list of supported <mem1>s), (list of supported <mem2>s), (list of sup-
ported <mem3>s)
Parameter
See write command
Read command
AT+CPMS?
Response
+CPMS: <mem1>,<used1>,<total1>,<mem2>,<used2>,<total2>,
<mem3>,<used3>,<total3> OK
If error is related to ME functionality:
+CMS ERROR
Parameter
See write command
Write command
AT+CPMS=
<mem1>
[,<mem2>
[,<mem3>]]
Response
TA selects memory storages <mem1>, <mem2> and <mem3> to be used for read-
ing, writing, etc.
+CPMS: <used1>,<total1>,<used2>,<total2>,<used3>,<total3> OK
If error is related to ME functionality:
+CMS ERROR:<err>
Parameter
<mem1> Memory to be used when listing, reading and deleting messages:
“SM” SIM message storage
“ME” Mobile Equipment message storage
“MT” Sum of “ME” and “SM” storages
<mem2> Memory to be used when writing and sending messages:
“SM” SIM message storage
“ME” Mobile Equipment message storage
“MT” Sum of “ME” and “SM” storages
<mem3> Received messages will be placed to this storage if routing to TE is not
set. See AT+CNMI command with parameter <mt>=2 (Chapter 5.10).
“SM” SIM message storage
“MT” Sum of “ME” and “SM” storages
<usedx> Number of messages currently in <memx>
<totalx> Number of messages storable in <memx>
Reference
GSM 07.05
Note
General remarks
· The Mobile Equipment storage "ME" offers space for 25 short messages.
· The storage "MT" is the sum of the storages "ME" and "SM". The indices (<in-
dex>) from 1 to 25 are associated to the "ME" storage. Indices equal to 26 and
higher are allocated to the "SM" storage.
· <mem1>, <mem2> and <mem3> are saved in the non-volatile memory.
· The user should be aware that the setting “MT” involves “ME” and “SM”, with
“ME” being filled up first. If the "ME" storage is full, MC35 will proceed with the
"SM" storage.
Incomin
g
Class 1 short messa
g
es
(
ME s
p
ecific
)
will be
p
referabl
y
stored to