Environmental Declaration

ManualsBrandsSiemens ManualsOperator unitsVäggmonterade givare och rumsenheter för KNX, QMX3.P..

EPD - Type II

According to ISO 14021

QMX3.P30 Wall-mounted Sensor

QMX3.P70 Wall-mounted Sensor

QMX3.P02 Wall-mounted Switch

QMX3.P34 Wall-mounted Room Operation Unit

QMX3.P74 Wall-mounted Room Operation Unit

QMX3.P37 Wall-mounted Room Operation Unit

Product line

Beijing Siemens Cerberus Electronics Ltd.

No.1 FengZhiDongLu, XiBeiWang,HaiDian District

100094, Beijing / China

Management System since by

ISO 14001 (Environment) 01.05.2005 SGS

ISO 9001 (Quality) 01.06.2012 LPCB

OHSAS 18001 (OH&S) 01.12.2011 SGS

Typical energy consumption 1 … 2kWh/a

Maintenance

Fire protection according to

Fire load 3 … 4MJ

20-PAP Corrugated fiber board Gift box 43g

Not necessary

System One

EN 60730

Product

Environmental

Product Declaration

Type of equipment /

Product No.

Environmentally compatible

product design

Process control

Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes the

environmental impact of its products with respect to production, procurement, sales, use, services and disposal during the

product and process planning phases by complying with Siemens EP Standard No. 1 (former SN 36350) "Specifications on

Environmentally Compatible Product and System Design".

Product use

Risk of fire

Test current comsumption at DC24V

Packaging

Page 1/6

Summary of content (6 pages)

PAGE 1
EPD - Type II According to ISO 14021 Environmental Product Declaration Product Type of equipment / Product No. QMX3.P30 Wall-mounted Sensor QMX3.P70 Wall-mounted Sensor QMX3.P02 Wall-mounted Switch QMX3.P34 Wall-mounted Room Operation Unit QMX3.P74 Wall-mounted Room Operation Unit QMX3.P37 Wall-mounted Room Operation Unit Product Product line Process control System One Beijing Siemens Cerberus Electronics Ltd. No.
PAGE 2
EPD - Type II According to ISO 14021 Materials 20-PAP Corrugated fiber board Insert Notes on disposal One-way, recyclable Total weight of device 21g 104 … 152g The total weight of a device may deviate from the total of the weights of all individual components due to rounding.
PAGE 3
EPD - Type II According to ISO 14021 PCBAs (Printed Circuit Board assembled) FR4; TBBA; solder SnAgCu QMX3.P02 Main PCBA FR4; TBBA; solder SnAgCu QMX3.P30 Main PCBA variant FR4; TBBA; solder SnAgCu QMX3.P34&37&74 Main PCBA variant FR4; TBBA; solder SnAgCu QMX3.P70 Main PCBA variant FR4; TBBA; solder SnAgCu QMX3.P34&37 Sub PCBA variant FR4; TBBA; solder SnAgCu QMX3.P74 Sub PCBA variant FR4; TBBA; solder SnAgCu QMX3.P34&74 Touch PCBA variant FR4; TBBA; solder SnAgCu QMX3.
PAGE 4
EPD - Type II According to ISO 14021 Screw 2 2 QMX3.P02 Main PCBA 2 2 2 2 37 37 37 13 QMX3.P30 Main PCBA 11 QMX3.P34&37&74 Main PCBA QMX3.P70 Main PCBA 23 QMX3.P34&37 Sub PCBA 10 QMX3.P74 Sub PCBA 10 19 QMX3.P34&74 Touch PCBA 2 QMX3.
PAGE 5
EPD - Type II According to ISO 14021 Special components (part of the assembled PCB) [pcs] Packaging Gift box [g] Insert Disposal 43 43 43 43 43 43 21 21 21 21 21 21 The device is classified as waste electronic equipment in terms of the European Directive 2012/19/EU (WEEE) and must not be disposed of as unsorted municipal waste. The relevant national legal rules are to be adhered too. Regarding disposal, use the systems setup for collecting electronic waste.
PAGE 6
EPD - Type II According to ISO 14021 To the best of our knowledge and according to the information of our suppliers the above mentioned device and its packaging contain no substances of the candidate list according to Article 59 (1, 10) of the regulation (EC) No. 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) in concentrations above 0.1 % w/w. (Status according to the creation date of this document.