User Manual

ManualsBrandsSiemens ManualsOperator unitsQMX3_PXX_EPD_datasheet

EPD - Type II

Based on ISO 14021

QMX3.P40 Wall-mounted Sensor

QMX3.P40-1BSC Wall-mounted Sensor_Black lens

## ##

Product

Environmental

Product Declaration

Type of equipment /

Product No.

Product line

Beijing Siemens Cerberus Electronics Ltd.

No.1 FengZhiDongLu, XiBeiWang,HaiDian District

100094, Beijing / China

Management System since by

ISO 14001 (Environment) 05.07.2005 SGS

ISO 9001 (Quality) 06.01.2001 LPCB

OHSAS 18001 (OH&S) 12.12.2011 SGS

Typical energy consumption 1kWh/a

Maintenance

Fire protection according to

Fire load 4MJ

System One

Environmentally compatible

product design

Process control

Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes

the environmental impact of its products with respect to production, procurement, sales, use, services and disposal during

the product and process planning phases by complying with Siemens EP Standard No. 1 (former SN 36350)

"Specifications on Environmentally Compatible Product and System Design".

Product use

Risk of fire

Restricted Page 1/6

Summary of content (6 pages)

PAGE 1
EPD - Type II Based on ISO 14021 Environmental Product Declaration Type of equipment / Product No. Product QMX3.P40 Wall-mounted Sensor QMX3.P40-1BSC Wall-mounted Sensor_Black lens ## ## ## ## ## ## ## ## Product Product line Process control System One Beijing Siemens Cerberus Electronics Ltd. No.1 FengZhiDongLu, XiBeiWang,HaiDian District 100094, Beijing / China Management System since by ISO 14001 (Environment) 05.07.2005 SGS ISO 9001 (Quality) 06.01.
PAGE 2
EPD - Type II Based on ISO 14021 Packaging 20-PAP Corrugated fiber board Gift box 20-PAP Corrugated fiber board Insert Notes on disposal One-way, recyclable Total weight of device Materials 43 … 493g 21g 107g The total weight of a device may deviate from the total of the weights of all individual components due to rounding.
PAGE 3
EPD - Type II Based on ISO 14021 PCBAs (Printed Circuit Board assembled) FR4; TBBA; solder SnAgCu Special components (part of the assembled PCB) QMX3.P40 [g] Total weight of device QMX3.P40-1BSC *Variant parts list 107 107 Lens 20 20 Inner Frame 18 18 Back Housing 33 33 Mounting Plate 21 21 Restricted Page 3/6 QMX3.
PAGE 4
EPD - Type II Based on ISO 14021 Screw QMX3.
PAGE 5
EPD - Type II Based on ISO 14021 [MJ] 4 4 [kWh/a] 1 1 Fire load Typical energy consumption Special components (part of the assembled PCB) [pcs] Packaging Gift box [g] Insert 43 493 21 21 The device is classified as waste electronic equipment in terms of the European Directive 2012/19/EU (WEEE) and must not be disposed of as unsorted municipal waste. The relevant national legal rules are to be adhered too. Regarding disposal, use the systems setup for collecting electronic waste.
PAGE 6
EPD - Type II Based on ISO 14021 To the best of our knowledge and according to the information of our suppliers the above mentioned device and its packaging contain no substances of the candidate list according to Article 59 (1, 10) of the regulation (EC) No. 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) in concentrations above 0.1 % w/w. (Status according to the creation date of this document.