User's Manual
Table Of Contents
- SIMATIC RF300
- Legal information
- Table of contents
- 1 Introduction
- 2 Safety information
- 3 System overview
- 4 Planning the RF300 system
- 4.1 Fundamentals of application planning
- 4.1.1 Selection criteria for SIMATIC RF300 components
- 4.1.2 Transmission window and read/write distance
- 4.1.3 Width of the transmission window
- 4.1.4 Impact of secondary fields
- 4.1.5 Setup help of the readers of the second generation
- 4.1.6 Permissible directions of motion of the transponder
- 4.1.7 Operation in static and dynamic mode
- 4.1.8 Dwell time of the transponder
- 4.1.9 Communication between communications module, reader and transponder
- 4.2 Field data for transponders, readers and antennas
- 4.3 Installation guidelines
- 4.4 Chemical resistance of the transponders
- 4.5 Guidelines for electromagnetic compatibility (EMC)
- 4.1 Fundamentals of application planning
Table of contents
SIMATIC RF300
System Manual, 07/2016, C79000-G8976-C345-0x
11
8.24 MDS D522 ............................................................................................................................ 355
8.24.1 Characteristics ...................................................................................................................... 355
8.24.2 Ordering data ........................................................................................................................ 355
8.24.3 Mounting in metal .................................................................................................................. 355
8.24.4 Technical specifications ........................................................................................................ 356
8.24.5 Dimension drawing ............................................................................................................... 357
8.25 MDS D522 special variant .................................................................................................... 358
8.25.1 Characteristics ...................................................................................................................... 358
8.25.2 Ordering data ........................................................................................................................ 358
8.25.3 Mounting in metal .................................................................................................................. 359
8.25.4 Installation instructions.......................................................................................................... 359
8.25.5 Technical specifications ........................................................................................................ 361
8.25.6 Dimensional drawing............................................................................................................. 362
8.26 MDS D524 ............................................................................................................................ 363
8.26.1 Characteristics ...................................................................................................................... 363
8.26.2 Ordering data ........................................................................................................................ 363
8.26.3 Mounting on metal ................................................................................................................ 364
8.26.4 Technical specifications ........................................................................................................ 365
8.26.5 Dimension drawing ............................................................................................................... 366
8.27 MDS D525 ............................................................................................................................ 367
8.27.1 Characteristics ...................................................................................................................... 367
8.27.2 Ordering data ........................................................................................................................ 367
8.27.3 Application example ..............................................................................................................
368
8.
27.4 Technical specifications ........................................................................................................ 368
8.27.5 Dimension drawing ............................................................................................................... 370
8.28 MDS D526 ............................................................................................................................ 371
8.28.1 Characteristics ...................................................................................................................... 371
8.28.2 Ordering data ........................................................................................................................ 371
8.28.3 Mounting on metal ................................................................................................................ 372
8.28.4 Technical specifications ........................................................................................................ 373
8.28.5 Dimension drawing ............................................................................................................... 374
8.29 MDS D528 ............................................................................................................................ 375
8.29.1 Characteristics ...................................................................................................................... 375
8.29.2 Ordering data ........................................................................................................................ 375
8.29.3 Application example .............................................................................................................. 376
8.29.4 Technical specifications ........................................................................................................ 376
8.29.5 Dimension drawing ............................................................................................................... 378
9 System integration .............................................................................................................................. 379
9.1 Introduction ........................................................................................................................... 379
9.2 ASM 456 ............................................................................................................................... 382
9.3 ASM 475 ............................................................................................................................... 382
9.3.1 Features ................................................................................................................................ 382
9.3.2 Ordering data ........................................................................................................................ 383
9.3.3 Indicators .............................................................................................................................. 384
9.3.4 Configuration ......................................................................................................................... 386
9.3.5 Shield connection .................................................................................................................. 388
9.3.6 Technical data ....................................................................................................................... 389