User's Manual
Table Of Contents
- SIMATIC RF300
- Legal information
- Table of contents
- 1 Introduction
- 2 Safety information
- 3 System overview
- 4 Planning the RF300 system
- 4.1 Fundamentals of application planning
- 4.1.1 Selection criteria for SIMATIC RF300 components
- 4.1.2 Transmission window and read/write distance
- 4.1.3 Width of the transmission window
- 4.1.4 Impact of secondary fields
- 4.1.5 Setup help of the readers of the second generation
- 4.1.6 Permissible directions of motion of the transponder
- 4.1.7 Operation in static and dynamic mode
- 4.1.8 Dwell time of the transponder
- 4.1.9 Communication between communications module, reader and transponder
- 4.2 Field data for transponders, readers and antennas
- 4.3 Installation guidelines
- 4.4 Chemical resistance of the transponders
- 4.5 Guidelines for electromagnetic compatibility (EMC)
- 4.1 Fundamentals of application planning
Planning the RF300 system
4.2 Field data for transponders, readers and antennas
SIMATIC RF300
56 System Manual, 07/2016, C79000-G8976-C345-0x
Table 4- 16 Field data RF380R reader
Length of the transmission window
Operating distance
(S
a
)
Limit distance (S
g
)
in the x direction (L
x
)
in the y direction (L
y
)
MDS D100
140
100
5...170
210
MDS D124
80
80
1...120
140
MDS D126
180 140 2...145 190
MDS D139
140
90
5...160
200
MDS D160
80
40
2...64
80
MDS D165
200
140
5...170
200
MDS D200
200
160
5...150
195
MDS D261
190
120
5..120
160
MDS D324
100
60
2...96
120
MDS D339
290
140
5...160
180
MDS D400
240
120
2...200
240
MDS D423
110
60
5...75
90
MDS D424
100
70
2...120
140
MDS D425
80
45
2...35
50
MDS D426
220
160
0...155
195
MDS D428
80
50
2…70
95
MDS D460
80
70
2…65
90
MDS D524
100
70
2...120
140
MDS D525
??
??
??
??
MDS D526
220
160
0...155
195
MDS D528
80
50
2…70
95
All values are in mm
Table 4- 17 Field data RF382R reader
Length of the transmission window
Operating distance
(S
a
)
Limit distance (S
g
)
in the x direction (L
x
)
in the y direction
(Ly)
MDS D124
70 130 40...65 75
MDS D160
50
100
35...50
65
MDS D324
60 120 40...65 75
MDS D424
65
120
40...65
75
MDS D460
40
80
30...50
60
All values are in mm