User's Manual
Table Of Contents
- SIMATIC RF300
- Legal information
- Table of contents
- 1 Introduction
- 2 Safety information
- 3 System overview
- 4 Planning the RF300 system
- 4.1 Fundamentals of application planning
- 4.1.1 Selection criteria for SIMATIC RF300 components
- 4.1.2 Transmission window and read/write distance
- 4.1.3 Width of the transmission window
- 4.1.4 Impact of secondary fields
- 4.1.5 Setup help of the readers of the second generation
- 4.1.6 Permissible directions of motion of the transponder
- 4.1.7 Operation in static and dynamic mode
- 4.1.8 Dwell time of the transponder
- 4.1.9 Communication between communications module, reader and transponder
- 4.2 Field data for transponders, readers and antennas
- 4.3 Installation guidelines
- 4.4 Chemical resistance of the transponders
- 4.5 Guidelines for electromagnetic compatibility (EMC)
- 4.1 Fundamentals of application planning
Table of contents
SIMATIC RF300
6 System Manual, 07/2016, C79000-G8976-C345-0x
5.6.1 Features ............................................................................................................................... 166
5.6.2 RF380R ordering data ......................................................................................................... 166
5.6.3 Pin assignment of RF380R RS-232/RS-422 interface......................................................... 166
5.6.4 LED operating display .......................................................................................................... 167
5.6.5 Ensuring reliable data exchange .......................................................................................... 167
5.6.6 Metal-free area ..................................................................................................................... 168
5.6.7 Minimum distance between RF380R readers ...................................................................... 168
5.6.8 Technical specifications ....................................................................................................... 169
5.6.9 Approvals ............................................................................................................................. 171
5.6.10 Use of the reader in hazardous areas ................................................................................. 172
5.6.11 Use of the reader in hazardous areas for gases .................................................................. 173
5.6.12 Installation and operating conditions for the hazardous area .............................................. 173
5.6.13 Dimension drawing .............................................................................................................. 174
5.7 SIMATIC RF380R with Scanmode ...................................................................................... 175
5.7.1 Features ............................................................................................................................... 175
5.7.2 Ordering data for RF380R with Scanmode .......................................................................... 175
5.7.3 Pin assignment RF380R Scanmode RS-232 interface........................................................ 176
5.7.4 LED operating display .......................................................................................................... 176
5.7.5 Ensuring reliable data exchange .......................................................................................... 176
5.7.6 Metal-free area ..................................................................................................................... 177
5.7.7 Minimum distance between several RF380R Scanmode readers ....................................... 177
5.7.8 Technical specifications ....................................................................................................... 178
5.7.9 Approvals .............................................................................................................................
180
5.
7.10 Certificates and Approvals ................................................................................................... 181
5.7.11 Dimension drawing .............................................................................................................. 181
5.8 SIMATIC RF382R with Scanmode ...................................................................................... 182
5.8.1 Characteristics ..................................................................................................................... 182
5.8.2 RF382R with Scanmode ordering data ................................................................................ 182
5.8.3 Pin assignment RF382R Scanmode RS232 interface ......................................................... 183
5.8.4 LED operating display .......................................................................................................... 183
5.8.5 Ensuring reliable data exchange .......................................................................................... 183
5.8.6 Mounting on metal ............................................................................................................... 183
5.8.7 Minimum distance between several RF382R Scanmode readers ....................................... 184
5.8.8 Transmission window ........................................................................................................... 184
5.8.9 Technical specifications ....................................................................................................... 188
5.8.10 Approvals ............................................................................................................................. 189
5.8.11 Dimensional diagram ........................................................................................................... 191
6 Antennas ............................................................................................................................................. 193
6.1 Features ............................................................................................................................... 193
6.2 Ordering data ....................................................................................................................... 196
6.3 Ensuring reliable data exchange .......................................................................................... 196
6.4 Metal-free area ..................................................................................................................... 197
6.5 Minimum distance between antennas ................................................................................. 200
6.6 Technical specifications ....................................................................................................... 201
6.7 Dimensional drawings .......................................................................................................... 203