User's Manual
Table Of Contents
- 6 Antennas
- 7 RF300 transponder
- 7.1 Memory configuration of the RF300 transponders
- 7.2 SIMATIC RF320T
- 7.3 SIMATIC RF330T
- 7.4 SIMATIC RF340T
- 7.5 SIMATIC RF350T
- 7.6 SIMATIC RF360T
- 7.7 SIMATIC RF370T
- 7.8 SIMATIC RF380T
- 8 ISO transponder
Antennas
6.2 Ordering data
SIMATIC RF300
196 System Manual, 07/2016, C79000-G8976-C345-0x
ANT 30
The ANT 30 is designed for use in small assembly lines. In comparison to ANT 18, the
maximum write/read distance is approximately 60 % larger. Due to its compact construction,
the antenna can be easily positioned for any application using two plastic nuts (included in
the package). The antenna cable can be connected at the reader end.
6.2
Ordering data
Table 6- 1 Ordering data for antennas
Article number
ANT 1
incl. integrated antenna cable 3 m
6GT2398-1CB00
ANT 3 without antenna connecting cable 6GT2398-1CD30-0AX0
incl. plug-in antenna cable 3 m
6GT2398-1CD40-0AX0
ANT 3S
without antenna connecting cable
6GT2398-1CD50-0AX0
incl. plug-in antenna cable 3 m
6GT2398-1CD60-0AX0
ANT 8
without antenna connecting cable
6GT2398-1CF00
incl. plug-in antenna cable 3 m
6GT2398-1CF10
ANT 12
incl. plug-in antenna cable 3 m
6GT2398-1CC00
ANT 18
incl. plug-in antenna cable 3 m
6GT2398-1CA00
ANT 30
incl. plug-in antenna cable 3 m
6GT2398-1CD00
Table 6- 2 Antenna accessories ordering data
Article number
Antenna connecting cable
3 m
6GT2398-0AH30
6.3
Ensuring reliable data exchange
The "center point" of the transponder must be situated within the transmission window.