User's Manual
Table Of Contents
- 6 Antennas
- 7 RF300 transponder
- 7.1 Memory configuration of the RF300 transponders
- 7.2 SIMATIC RF320T
- 7.3 SIMATIC RF330T
- 7.4 SIMATIC RF340T
- 7.5 SIMATIC RF350T
- 7.6 SIMATIC RF360T
- 7.7 SIMATIC RF370T
- 7.8 SIMATIC RF380T
- 8 ISO transponder
ISO transponder
8.7 MDS D139
SIMATIC RF300
280 System Manual, 07/2016, C79000-G8976-C345-0x
6GT2600-0AA10
Degree of protection to EN 60529
• IP68
2 hours, 2 bar, +20 °C
• IPx9K
steam jet: 150 mm; 10 to 15 l/min; 100 bar; 75
°C
Shock-resistant to EN 60721-3-7 class 7M3
50 g
1)
Vibration-resistant to EN 60721-3-7, class 7M3
20 g
1)
Torsion and bending load
Not permitted
Design, dimensions and weight
Dimensions (Ø x H)
85 x 15 mm
Weight
50 g
Type of mounting 1 x M5 screw
2)
1.5 Nm
1
The values for shock and vibration are maximum values and must not be applied continuously.
2)
For mounting with the spacer (6GT2690-0AA00), use a stainless steel M5 screw to avoid damag-
ing the MDS in high temperatures (expansion coefficient).
8.7.6
Use of the MDS D139 in hazardous areas
The MDS D139 mobile data memory is classed as a piece of simple, electrical equipment
and can be operated in Protection Zone 2, Device Group II, Category 3G.
The following requirements of the 94/9/EC directive are met:
● EN 60079-0:2006
● EN 60079-15:2005
● EN 61241-0:2006
● EN 61241-1:2004
Identification
II 3 G Ex nA II T2
II 3 D Ex tD A22 IP68 T 220°C
KEMA 09 ATEX 0133 X
Ta: -25 ... +220°C