User's Manual

Table Of Contents
ISO transponder
8.8 MDS D160
SIMATIC RF300
284 System Manual, 07/2016, C79000-G8976-C345-0x
Table 8- 19 Ordering data for MDS D160 accessories
Article number
Spacer
6GT2690-0AG00
8.8.4
Mounting on metal
Mounting on metal
Transponder
Metal carrier
Spacer
h
≥ 10 mm
Figure 8-17 Mounting the MDS D160 on metal with spacer
Note
Going below the minimum distance (h)
If the minimum distance (h) is not observed, a reduction of the fie
ld data results.
In critical applications, it is recommended that a test is performed.
Flush-mounting
Flush-mounting of the MDS D160 in metal is not permitted!