User Manual

CE1N3111en
2018-03-15
Building Technologies
3
111
Synco™ 700
Operator Unit
RMZ790
Plug-in type operator unit for use with Synco™ 700 controllers, Central Control
Unit and Switching and Monitoring Device
Use
The RMZ790 operator unit has been designed for use with the following controllers,
Central Control Unit and Switching and Monitoring Device:
· Heating controllers RMH7…, RMK7
· Universal controllers RMU7
· Central Control Unit RMB795…
· Switching and Monitoring Device RMS705…
These types do not have an operating facility of their own.
Functions
The operator unit is used to make all controller settings and to display all data required
in connection with the controller. All entries made on the operator unit are transmitted
to the controller where they are handled and stored; the operator unit itself does not
store any data.
The information required by the user is generated by the controller and delivered to the
operator unit for display.

Summary of content (6 pages)