User Manual

EPD - Type II
Based on ISO 14021
Designation
Product line, product range
Siemens S.A.S.
Division BUILDING TECHNOLOGIES (BT)
Gubelstrasse 22
6300 Zug, Switzerland
Management System since by
ISO 9001 (Quality) 22.07.1986 SQS
ISO 14001 (Environment) 20.10.1998 SQS
OHSAS 18001 (OH&S) 01.01.2011 SQS
Maintenance
Fire load NA
Total weight of device 76 621g
The total weight of a device may deviate from the total of the weights of all individual components due to rounding.
PP; halogen-free Machined float 166g
PP; halogen-free Additional float 240g
Inox 316L (X2CrNiMo 17-12-2) Stainless steel diptube 745g
steel DD13; zinc plated Protective cap, cylinder with flange 2 719g
Laiton (CW614N) Machined diptube screw 82g
Laiton (CW614N) Outside plug 3/4" Hexag/knurled/drilled 100g
Laiton (CW614N) Sealing end cap 31g
Laiton (CW614N) 96 bar safety disc unit monofa 96 13g
Laiton (CW614N) Machined valve body 48g
Laiton (CW614N) Machined window clamp 19g
Laiton (CW617N) Machined connection head - Tetao 1 756g
34CrMo4 (cylinder) + S235 (flange); RAL 5010 (polyester TGIC free) + Worthington longlife powercoat "SL" Machined nacked 82l cylinder bout82-wate 70 700g
glass Machined glass 5g
Comments
19.12.2018
Sinorix H2O gas, H2O Cylinder
Environmental
Product Declaration
H20 Cylinder 82l w water head / S54476-B248-A1
Pression test in the water cylinder and valve change
10 years
Type of equipment / Product No.
H20 Cylinder 82l w water head
Product
Environmentally compatible
product design
Process control
Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes the environmental impact of its products with respect to
production, procurement, sales, use, services and disposal during the product and process planning phases by complying with Siemens EP Standard (former SN 36350)
"Specifications on Environmentally Compatible Product and System Design".
Metals
Plastics
Materials
Regulation (EC) No. 1907/2006 (REACH)
The device is halogen-free.
Others
The device should not be disposed of as unsorted municipal waste. The special treatment for specific components may be mandated by law or ecologically sensible.
Observe all local and applicable laws.
Disposal
Please contact your local Siemens branch office to get further information on environmental aspects and disposal.
Legal Disclaimer: This declaration is for information purpose only.
Siemens S.A.S. therefore does not assume liability for any error or for any consequences which may arise from the use of this information to the maximum extent under the law.
This Environmental Product Declaration does not constitute a guarantee of the composition of a product, neither does it guarantee that the product will retain a particular composition for a particular period.
EU-directive 2011/65/EU (RoHS)
The device does not contain substances in concentrations and applications banned under the EU RoHS Directive.
The device contains the following substances of the candidate list according to Article 59 (1, 10) of the regulation (EC) No. 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of
Chemicals (REACH) in concentrations above 0.1 % w/w.
Lead, CAS-Nr.7439-92-1
(Status according to the creation date of this document.)
Restricted Page 1/1