Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03 Table of contents Preparing to use your phone .......................................................................................... 4 The pack contains ................................................................................................... 4 Installing the phone ................................................................................................ 4 Description of display of the handset ................
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03 Marking a directory entry as VIP .......................................................................... 15 Dialing from stored caller-ID ................................................................................ 15 Deleting a number in the Directory ....................................................................... 15 Deleting all numbers in the Directory ............................................................
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03 Preparing the Phone for service The pack contains z z z z z z Base Handset Rechargeable battery Phone cord Power supply units One set of operating instruction Install the phone 1. To open the battery compartment, press the battery cover of the handset and slide it down. 2. Insert the battery plug into the socket in the battery compartment and place the battery into the battery compartment. 3. Push up the battery cover. 4.
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03 Note: The dial mode of this phone has been set to tone dialing. If you want to change it to pulse dialing, please refer to the descriptions in the “Tone/Pulse Switch” section to turn to pulse. If you are not sure which mode to apply, please consult your phone service company. 9ˊPlace your base away from the “interference sources” (e.g.: TV, PC, microwave oven, refrigerator, etc.
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03 Settings “Tone/pulse” switch On the rare of the base is a “Tone/Pulse” switch for tone or pulse mode selection.
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03 Adding IDD code to the incoming calls For example, an incoming call display is “13928389222”, after set the international direct dial (IDD) code as “0”, will be “013928389222” because the telephone add a “0” before the incoming number. Press the Mem/Prog key for 2 seconds Press Channel/Select key until “Lo CodE” appears Enter one digit of IDD code, which can be deleted by pressing the Flash/Clear key.
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03 Selecting VIP Ringer Tones Press the Mem/Prog key for 2 seconds Press the Channel/Select key until “VIP Ring” appears Press Ʒ or ͩ to select the ringer melody. (8 melodies) Press the Mem/Prog key for confirmation Press Exit to exit Note: you must apply for “Show incoming call number” service (or Caller ID Service) to validate this function.
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03 Basic operation Answering a call Look over the incoming calls on the phone. Press the Talk key to answer a call. Press the same key to hang up. Making A Call Press Talk key and then enter a number, or enter a number and then press the Talk key to make a call. Outgoing call Press the Redial ͩ key, and then the relevant characters (REDIAL) will be displayed on the screen. Press Ʒ or ͩ key to browse the outgoing call records.
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03 Deleting outgoing call Be sure the handset or the base is in standby. Press the Outgoing Call (Redial) ͩ key or Channel/Select key until “Outgoing Call” appears on the display. Press Ʒ or ͩ key to select the outgoing records. Then press the Flash/Clear key. The screen will display “Delete”. Press Flash/Clear key again to confirm to delete the selected record, or press Exit key to give up.
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03 Temporary tone dialing This function is designed for pulse dialing users, which can change the pulse dialing to tone dialing temporarily to access the service system that requires tone dialing. For example, after accessing banks or credit card companies, if the user wants to operate in their internal system, then he/she must change the pulse dialing to tone dialing temporarily.
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03 Press CID Ʒ key to search incoming calls. Press Ʒ key to browse the records from the latest call. Press CID ͩ key to browse the records from the oldest call. Press the “0/Next” key to view other call numbers, as well as the relevant time and date. Storing the incoming call numbers to the directory Be sure the base and the handset is in standby. Press CID Ʒ key. Press Ʒ or Ʒ key to browse and select incoming call records.
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03 Directory It can store 16 numbers in the directory, and each number can include 20-digits. The incoming phone numbers can also be stored in the directory. Be sure the handset or the base is in idle status. Enter the phone number (maximal 20 digits). Press Delete key to change the number. Press the Mem/Prog key and then enter the location the number will be stored to (01-16).
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03 Marking a directory entry as VIP If a number is set to be a VIP one, when receiving such a call, you will hear the VIP ringer tone. How to set the VIP call: Press the Channel/Select key until “Store” appears on the display. Press Ʒ or ͩ key to browse the records. Press the Mem/Prog key and “VIP” will appear on the display. (Press Mem/Prog again to cancel the VIP setting.) Note: When finished, press the Exit key to exit.
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03 Speed dialing This function is designed for users who frequently make long distance calls. Following the instructions, you can speed dial a number: For example: Parts of a long-distance number Area Code Phone number Extension Location in the Directory 07 08 09 Press Talk key. Press the Mem/Prog key, and then press 07. After you hear the number is dialed, press the Mem/Prog key and then press 08.
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03 - Press twice the Redial/Pause key. Enter 1373110888889888 (the card number and pin). Press #. Press the Mem/Prog key to confirm. IP dialing and calling back Dialing a long-distance number with IP function: z When the handset is in standby, enter the long-distance number and then press the IP key. The base will automatically dial with the IP number added before the long-distance number.
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03 Enter PIN 0588. Enter the restricted number 1689. Press the Mem/Prog key to confirm. The handset will make a confirmation tone. Note: If the entered PIN is different with the stored one, the handset will make a hint tone. Cancel Lock Code For example, Follow the following steps to cancel the lock: Successively press #, #,1,#. Enter PIN 0588. Press the Save/Set key to confirm.
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03 Replacing batteries Be sure the handset is in idle status. 1. To open the battery compartment, press the battery cover of the handset and slide it down. 2. Take out the batteries. 3. Insert new batteries into the battery compartment. 4. Push up the battery cover. 5. Place the handset with batteries inserted back in the charger. 6. Note: For the first time, the batteries should be charged for at least 12 hours before use. 7.
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03 Q&A Incoming numbers Question No display Show error about the caller’s information Answer Replace the batteries and be sure they are installed correctly. Have you applied for the Incoming Call Display service from your phone service company? If the base receives any information that is different from the valid incoming call information, it will show error.
Gigaset 4010 Comfort, CHIN eng, A31008-G4010-C102-1-7619 umschl_v.fm 16.10.03 Hotline Hotline email ˖ccq_cp.com@siemens.com Hotline service tel ˖4006 706 007 Website: www.siemens.com.
Appendix (Interface Illustration) setting/store channel /search call in/out quit dial change the pulse dialing to tone dialing temporarily flas h/delet redial/pause time setting next display