User's Manual Addendum

2130287 Rev 2.0 Jan.03
Addendum to the AirCard 750
Installation Guide
The AirCard 750 wireless network card has been granted
modular approval for mobile applications. Integrators may use
the AirCard 750 card in their final products without additional
FCC certification if they meet the following conditions.
Otherwise, additional FCC approvals must be obtained.
1. At least 20 cm separation distance between the antenna
and the user’s body must be maintained at all times.
2. To comply with FCC regulations limiting both maximum
RF output power and human exposure to RF radiation, the
maximum antenna gain in PCS band cannot exceed 4.6
dBi.
3. A label must be affixed to the outside of the end product
into which the AirCard 750 is incorporated, with a
statement similar to the following:
This device contains TX FCC ID: N7NAC750.
4. A user manual with the end product must clearly indicate
the operating requirements and conditions that must be
observed to ensure compliance with current FCC RF
exposure guidelines.