Installation guide

Watcher Basics
Rev 2 Mar.11 29
Call Status Area
TheCallStatusAreadisplaysmessagesrelatedtothestatusor
progressofaconnection.
Whereadurationtimerisshown, timingbeginswhenthecall
isinitiated—notfromthetimethecallisfullyconnected.This
isameasureofthetime theAirCardhasbeenusingtheradio
channel
(awirelessnetworkresource).
“
Click this display to exit PowerSave mode”indicatesthatthe
AirCardcouldnotfindasystemwithina15 minuteinterval.
Toconservepower,theAirCardreduceschannelscanningto
onceeverythreeminutes.ToforcetheAirCardoutof
PowerSavemode,clickintheCallStatusArea.TheAirCard
performsachannelscanand,ifnonetwork
isdetected,returns
toPowerSavemode.
In WiFi coverage; not connected
WiFi connected
WiFi signal strength (displayed in the right part of the Connection Status
Area)
The In Use indicator shows whether a call is in progress. No icon is displayed when
the AirCard is idle. Otherwise, one of these icons is displayed:
A high-speed (1xEV-DO) packet data call is in progress.
A high-speed (1X) packet data call is in progress.
A circuit switched data call is in progress.
A high-speed (1X or 1xEV-DO) packet data connection is dormant; the
radio channel has been released allowing you to make and receive
voice calls. You can resume data transmission without the need of re-
establishing the connection.
Some applications may not be able to function on a dormant
connection.
A fatal error has occurred and the AirCard is inoperable. Close Watcher
and restart your PC.
Table 6-1: Connection Status Area icons (continued)
Icon Meaning