User`s guide

Section 2A: Installing the Software 17
2. Use the Next and Back buttons to navigate through the wizard noting the
following:
䡲 You must select I accept the terms in the license agreement to indicate your
acceptance of the terms of the license agreement to proceed with the
installation.
䡲 Use the default settings for the Destination Folder unless you have special
requirements and an advanced understanding of PC configuration. (The
Destination Folder dictates where the software is installed.)
䡲 To install the optimization software (optional; this software can increase
your perceived system speed), in the Installation Options window, select
the check box for the Optimization Client.
3. At the end of the installation, you will be prompted to restart your computer.
Ensure you save your work in other applications, if applicable.
4. When the “Installation Complete!” window is displayed, click Restart, to
restart Windows.
5. When Windows has restarted, run Sprint PCS Connection Manager
(double-click the program's icon on your desktop).
6. Once Sprint PCS Connection Manager displays “Insert Your Card”, insert the
card into the PC Card slot (see page 20).
Windows will detect the card and install the drivers for it. This may take a few
minutes. Once completed, Sprint PCS Connection Manager should display
“Disconnected”.
Proceed to configure the Sprint PCS Connection Card to use your account (if it was
not pre-activated); see “Activating and Using Sprint PCS Service” on page 24. If
your card is pre-activated, then you are ready to connect to the network; to learn
about using the software, proceed to “Your Sprint PCS Connection Card:
The Basics” on page 31.
NOTE:
If you have an older version of Sprint PCS Connection Manager and are
experiencing problems during installation, use the Add/Remove Programs
Utility (see page 47) to remove the older version of Sprint PCS Connection
Manager. Then reinstall the current version of Sprint PCS Connection
Manager from the Installation CD.