User`s guide

26 Section 2C: Setting Up Service
4. Enter the phone number (no spaces or hyphens) and, if not the same value as
the phone number, the MSID value given by the account representative, then
click Next.
A confirmation window will be displayed.
5. Confirm with the service representative that the information is correct. If it is,
click Ye s. If it isn't, click No, and re-enter the information.
6. Click Finish to close the Activation Wizard.
7. Wait a few moments for the Sprint PCS Connection Card to automatically
reset. Depending on your configuration, an IOTA session may automatically
start (“Data Provisioning [IOTA]”, below).
After Sprint sets up your account on the network, your Sprint PCS Connection Card
should be configured and ready for use.
Data Provisioning (IOTA)
IOTA (Internet Over The Air), supported by some service providers (including
Sprint), is an automated feature to perform account setup for you by making a
connection to the CDMA network and using a secure Internet connection to
download account parameters to your Sprint PCS Connection Card. To make this
secure connection, IOTA requires that your computer support 128-bit encryption
(see “High Encryption Requirements” on page 9).
Depending on your configuration, the first time Sprint PCS Connection Manager
detects the activated card, an IOTA session may automatically start, during which
status messages (“Updating User Profile…”) are displayed.
After this first activation, there may be changes to your account that require
updating the parameters in the Sprint PCS Connection Card. If this is needed:
1. In the Device Info & Diagnostics window (page 64), click Update Data Profile.
(If this button is not displayed, eject and re-insert the card.)
2. In the IOTA Provisioning window, click Yes .
Your Sprint PCS Connection Card then retrieves the updates to your data services
account.
Once the updates are successful, Sprint PCS Connection Manager is displayed
(“Disconnected”). You can now connect to the network.