User Guide

Global Positioning System (GPS)
Rev 3.0B Feb.08 94
12‐GPS+Date‐GPSdatawiththeUTCtimeand
date
13‐GPS+Date+RF‐GPSdatawiththeUTCtime
anddateandRadioFrequencyinformation fromthe
antenna.
Figure 10-15: AceManager : PinPoint - *PPGPSR
Tip: If your AVL host server uses a dynamic IP address or needs to
change its IP address for any reason, you can use the RAP configu
-
ration command to change the value for *PPIP.
RAP Reports over a Local Connection
LocalreportsaresenttothelocalIPaddressofthecomputeror
deviceconnecteddirectlytoaportonthePinPointX.The
reportsaresentusingPPPorSLIPforserialorUSBvirtual
serial.ToconfigurethemodemtosendreportstothelocalIP
address,youwill
needtoset3commands:S53intheMisc
groupand*PPLATSand*PPLATSRinthePinPointgroup .
a. SettheS53porttotheloca lporttowhichyouwantthe
reportssent.ThelocalIPaddres swillautomaticallybe
used.
Figure 10-16: AceManager : Misc - S53