User Guide

Global Positioning System (GPS)
Rev 3.0B Feb.08 95
b. SettheLocalReportType,using*PPLATSR,toyour
preferredRAPreporttype.
Figure 10-17: AceManager : PinPoint - *PPLATSR
11‐GPS‐GlobalPositioningSystemdata
12‐GPS+Date‐GPSdatawiththeUTCtimeand
date
13‐GPS+Date+RF‐GPSdatawiththeUTCtime
anddateandRadioFrequencyinformation fromthe
antenna.
c. SetLocalReportingTimeInterval,using*PPLATS,to
thenumberofsecondsyouwantasaninterval
betweenreportsbeingsent.
Tip: If *PPLATS is set to 0, reports will only be sent if a poll command
is issued by the local client.
Figure 10-18: AceManager : PinPoint - *PPLATS
Configuring Additional RAP Features
RAPallowsadditionalinformationtobesentwiththereports
toenablearichertrackingfeatureset.
Device ID
Byenabling*PPDEVID,adeviceIDofthePinPointXissentas
partoftheRAPmessagetomakeidentificationeasierina
networkorfleetofvehiclesequippedwithPinPointline
devices.
Figure 10-19: AceManager : PinPoint - *PPDEVID
With*PPDEVIDenabled,thePinPointXwillusethevalue
configuredfor*NETPHONEforthedeviceID.If*NETPHONE
isempty,theESNofthemodemwillbeused.