User Guide

Global Positioning System (GPS)
Rev 3.0B Feb.08 99
Figure 10-26: AceManager : Misc - S53 Port
b. SettheLocalReportType,*PPLATSR,toyour
preferredNMEAsentenceformat.
Figure 10-27: AceManager : PinPoint - *PPLATSR
• E0‐NMEAGGAandVTGsentences.
• E1‐NMEAGGA,RMC,andVTGsentences.
c. SetLocalReportingTimeInterval,using*PPLATS,to
thenumberofsecondsyouwantasaninterval
betweenreportsbeingsent.
Figure 10-28: AceManager : PinPoint - *PPLATS
Streaming Messages (Local)
ThePinPointXcanbe configuredtosendstandardNMEA
messages(sentences)inASCIIovertheserialportand/orUSB
portwithoutaPPPconnectiontothelocalcomputer.
SendthecommandATGPS1totheserialport,ATGPS2tothe
USBport,orATGPS3forbothtobegintheNMEAstream.The
examplebelowshowsthestreaminHyperTerminal
connectingdirectlytoaPinPointXviathecomportand/orUSB
port.Tostopthestream,witheitherterminalconnection,use

thecommandATGPS0(thiscanbeenteredevenwhiledatais
streaming).