User Guide

Configuration Commands
Rev 3.0B Feb.08 124
OPRG=n
Enables/disablesover‐the‐airfirmwareupgradingofthe
PinPointX.WhenSierraWirelessreleasesanewversionof
ALEOS,youcanupgradeyourremotemodemswithOPRG
enabled.
• n=0:Disables
• n=1:Enables
S53=[method][d.d.d.d][/ppppp]
DestinationIPaddress,port,andmethod.Theseareusedas
defaultsfortheD(Dial)ATcommand.
• method=P:UDP
• method=T:TCP
• method=N:Telnet
• d.d.d.d=IPaddressordomainname 
• ppppp=theportaddress
Examples:
ATS53=T192.168.100.23/12345
ATS53=foo.earlink.com
TelnettothespecifiedIPatport12345.
ATS53=192.168.100.23/12345
QuerythespecifiedIPatport12345.
ATS53=/12345
Queryport12345.
Z
ResetthePinPointX.InAceManager,thiscommandis
performedwiththeResetoptiononthetoolbar.
Tip: *DATZ=1 will disable Z.
&W
Writesallchangedmodemsettings.Ifthiscommandisnot
issued,anymodifiedvalueswillrevertbacktotheir previous
valuesatmodemreset.CannotbeconfiguredinAceManager.
*DATE=[mm/dd/yyyy],[hh:mm:ss]
Setsandqueriestheinternalclock.Eitherthedateandtime
canbespecified,orsi mplyoneofthetwocanbespecifiedin
whichcasetheunspecifiedvaluewillremainunchanged.The
dateandtimearealwaysspecified24‐hournotation.
• mm/dd/yyyy=dateinmonth/day/yearnotation