User Guide

Configuration Commands
Rev 3.0B Feb.08 125
• hh:mm:ss=timein24‐hournotation
*DPORT=n
ThemodemʹsDevicePortwhichthemodemislisteningonfor
inboundpackets/data/polls.Canalsobesetwiththecommand
S110.
• n=1‐65535
*HOSTPAP=n
UsePAPtorequesttheuserloginandpasswordduringPPP
negotiationonthehostconnection.
• n=0:DisablePAPrequest(Default).
• n=1:TakesuserloginandpasswordfromWindowsDUN
connectionandcopiesto*NETUIDand*NETPW.
*NETALLOWZEROIP=n
AllowsthedisplayedIPaddressin*NETIPtoendinzero(ex.
192.168.1.0).
• n=0:Donotallow.
• n=1:Allow.
*NETPW=pw
Thepasswordthatisusedtologintothecellularnetwork,
whenrequired.
• pw=password(30charactersmaximum)
*NETPHONE?
Themodem’sphonenumber,ifapplicableorobtainable.
•
*NETUID=uid
Theloginthatisusedtologintothecellularnetwork,when
required.
• uid=userid(upto64bytes)
*STATICIP=d.d.d.d
Setthe staticIPrequiredtobereceivedfromthenetwork.Ifthe
modemdoesnotgetthisIPaddressfromthenetwork,itwill
resettheinternalhardwareandtryagain.Thedefaultis0.0.0.0,
whichallowsanyIPaddressfromthenetwork.
• d.d.d.d=IPaddress
Example:
AT*STATICIP=192.168.1.23