User Guide

Configuration Commands
Rev 3.0B Feb.08 136
*DNSUPDATE=n
IndicateswhetherthemodemshouldsendDNS updatestothe
DNSserverspecifiedby*DNSUSER.Theseupdat esareasper
RFC2136.Theyarenotsecureandarerecommendedonlyfora
privatenetwork.Inapublicnetwork,theIPLoggerservices
shouldbeusedinstead.
• n=0:DNSupdatesdisabled(Default).
• n=1:DNSupdatesenabled.
*DNSUSER=d.d.d.d
Setsauser‐providedDNStoqueryfirstwhenperforming
nameresolutionsinthemodem.
• d.d.d.d=IPaddressofdomainserver
Dynamic IP
ThisgroupincludescommandsspecifictodynamicDNS.
DynamicDNSallowsthePinPointXtouseadynamicIP
addressaccount,withanIPaddressthatcanchangeeachtime
youconnect,andstillallowyoutouseafullyqualifieddomain
nametocontactthePinPointXusingIPManager
runningona
serverwithadynamicDNSupdater.
Figure 1-11: AceManager : Dynamic IP
*DOMAIN=name
Domain(ordomainzone)ofwhichthePinPointXisapart.
Thisvalueisusedduringnameresolutionsifafullyqualified
nameisnotprovidedandalsoforDNSupdates.Thisvaluecan
beupto20characterslong.
• name=domainname(i.e.eairlink.com)
If*DOMAIN=eairlink.com,thenwhenATDT@remote1is
entered,thefullyqualifiednameremote1.eairlink.comwillbe
usedtoperformaDNSquerytoresolvethenametoanIP
address.