User Guide

Configuration Commands
Rev 3.0B Feb.08 138
Example:if*MODEMNAME=mymodemand
*DOMAIN=eairlink .com,thenthemodemʹsfullyqualified
domainnameismymodem.eairlink.com.
AutomaticallyGeneratedNames:
#I3‐TheESN/IMEIwillbeusedasthename.
#CCID‐TheCCIDwillbeusedasthename.
#NETPHONE‐Thephonenumberwillbeusedasthename.
Tip: Each modem using IP Manager needs a unique name. Two
modems cannot be called “mymodem”. One could be “mymodem1”
with the other as “mymodem”.
PPP/Ethernet
ThisgroupincludescommandsspecifictoPPP(serial)or
EthernetconnectionsbetweenthePinPointXandaconnected
device.
Figure 1-12: AceManager : PPP/Ethernet
*DHCPSERVER=n
• ActasaDHCPserverforanyEthernetdeviceconnecting
tothePinPointX.DHCP(DynamicHostConfiguration
Protocol)allowsonedevice,theDHCPserver,toprovide
dynamicIPaddressestoanyotherdevicewhichrequests
them.
• n=1:Enabled.ThemodemwillactastheprimaryDHCP
serverforthenetwork.
• n=2:EnabledifnootherDHCPserverisdetected
(default).IfanotherDHCPserverisdetectedonthe
network,thePinPointXwillnotsendoutrepliestoDHCP