User Guide

Configuration Commands
Rev 3.0B Feb.08 149
Figure 1-17: AceManager : Friends
FM=n
FriendsMode‐OnlyallowspecifiedIPstoaccessthePinPoint
Xmodem.
• n=0:DisableFriendsmode
• n=1: EnableFriends mode‐Onlypacketsfromfriendswill
beaccepted,packetsfromotherIPaddressesareignored.
Fn=[d.d.d.d]
FriendsmodeIPaddress.
• n=0‐9Friendslistindex
• d.d.d.d=IPaddress
Using255intheIPaddresswillallowanynumber.
Example:166.129.2.255allowsaccessbyallIPsintherange
166.129.2.0‐166.129.2.255.
Tip: ATF? will return a list of all the current Fn settings.
Logging
Thisgroupincludescommandsspecifictotheinternallog.
Caution: Logging is intended for diagnostic purposes only. Extensive
use of logging features can cause degraded modem performance.