User Guide

Configuration Commands
Rev 3.0B Feb.08 150
Figure 1-18: AceManager : Logging
*DBGCOMMLVL=n
Setthelogginglevelforthe hostormoduleCOMport.
• n=0:Nologging
• n=1:HostCOMPort
• n=2:ModuleCOMPort
*DBGDHCPLVL=n
EnableordisableinternalDHCPlogging.
• n=0:Nologging
• n=1:LogDHCPevents.
*DBGETHLVL=n
SetsthelogginglevelfortheEthernetport.
• n=0:Nologging
• n=1:Logerrors:invalid/corruptpackets,etc.
• n=2:Logtheheaderofallreceivedpackets.Notethatthis
canquicklyexhaustavailablespacefortheeventlog.
*DBGIPLVL=n
SetsthelogginglevelfortheIPsubsystem.
• n=0:Nologging
• n=1:Logerrors(i.e.inva lid/corruptpackets,etc.).
• n=2:Logtheheaderofallreceivedpackets.Notethatthis
canquicklyexhaustavailablespacefortheeventlog.
• n=3:Logtheheaderofallreceivedandsentpackets.Note
thatthiscanquicklyexhaustavailablespacefortheevent
log.
*DBGPPPLVL=n
SetsthelogginglevelforthePPPstack.
• n=0:Nologging