User Guide

Configuration Commands
Rev 3.0B Feb.08 154
*PPIP=d.d.d.d
IPaddresswhereGPSreportsaresent(ATSServerIP).Also
see*PPPORT.
• d.d.d.d=IPaddress
Example:
AT*PPIP=192.100.100.100
*PPLATS=n
LocalATS‐CausesGPSreportstoalsobesentouttheserialor
Ethernetlinkeverynseconds,whenthereisaPPPconnection
totheserialhostoraconnectiontotheEthernetportisestab
‐
lished.
• n=0:Disable
• n=1‐255seconds
Tip: Sends to the PPP peer IP S110 with the Destination Port number
S53.
*PPLATSEXTRA=n
HavelocalATSreporting(LATS)sendupto7extracopiesofa
GPSreporttothesubsequentports.
• n=0:Justtheoriginalreportissent(default).
• n=1‐7:SendGPSreportcopiestothatnumberofports.
Example:IfAT*PPLATSEXTRA=7andtheportinS53is1000,
thenGPSreportswillbesenttoports1000‐1008.
*PPLATSR=n
IndicatesthetypeofGPSreporttosendtothelocalclient
(PPP/SLIPpeer).See*PPGPSR.
• n=0x11:StandardGPSReport
• n=0x12:StandardGPSReport+UTCDate
• n=0x13:StandardGPSReport+UTCDate+RFdata
• n=0xE0:GGAandVTGNMEAreports
• n=0xE1:GGA,VTGandRMCNMEAreports
• n=0xF0:TAIPreports
• n=0xF1:CompactTAIPdata
*PPMAXRETRIES=n
MaximumnumberretrieswheninSimpleReliableMode.
• n=0:Disabled
• n=1‐255retries