User Guide

Configuration Commands
Rev 3.0B Feb.08 157
• n=0:Disabled
• n=1‐65535(default9494)
*PPTIME=n
GPSReportTimeInterva l.Seealso*PPMINTIME,*PPTSV,
+CTA.
• n=seconds(1‐65535)
Note: Your cellular carrier may
impose a minimum transmit time.
Caution: A report time of less than 30 seconds can possibly keep an
RF link up continuously. This will eventually cause the PinPoint X to
overheat and shutdown. An RF resource may continue be tied up to
transfer small amounts of data. Generally the RF channel will be
released and go dormant in 10-20 seconds of no data sent or
received.
*PPTSV=n
TimerforStationaryVehicles.Timeintervalinminutesthatthe
PinPointXwillsendinreportswhenitisstationary.
• n=0:Disabled
• n=1‐255minutes
Forexample,if*PPTIME=10,thePinPointXwillsendin
reportsatleastevery10secondswhileitismoving;however,
onceitstopsmoving,itwillslowthereportsdowntothis
*PPTSVvalue.
*UDPRGPS=n
SetorqueryGPSstampingofUDPReliablepackets.Whenset,
datareceivedonthehostserialportwillbeencapsulatedwith
theGPSdateandtime.
• n=0:Disabled(default)
• n=1:Enabled
I/O
Thisgroupincludesconfigurationcommandsforthedigital
andanaloginputsandrelayoutputs.Someofthevalues
shownasapartofthisgrouparenotchangea b lebutreflectthe
currentstatus.