User Guide

Configuring your PinPoint X
Rev 3.0B Feb.08 36
Using a Terminal Application
with AT Commands
YoucanaccessandconfigureyourPinPointXusingaterminal
applicationsuchasMicrosoftHyperTerminal,PuTTY,or
similar.ThefollowingdirectionsareforHyperTerminalwhich
ispartofastandardinstallationofWindowsXP.
Start>AllPrograms>Accessories>Communications>HyperTer‐
minal
Figure 5-13: HyperTerminal
1. Choose a name and icon for your
connection.
a. Chooseanameforyourconnection,suchasPinPointX
orSierraWirelessAirLinkSolutions.Thenameandicon
areonlyforyourownreferencesoyoucanfindthe
connectionatalaterdate.
Tip: If you want to have a connection saved for both local and
remote, it is recommended the connection name reflect the
connection type, i.e. PinPoint X local.
b. SelectOK.