User Guide

Configuring your PinPoint X
Rev 3.0B Feb.08 37
2. Connect To
UsingSerial:
a. SelectCOM1,orthecomporttowhichthemodemis
connected,forthe“ConnectUsing”.
Figure 5-14: Connect To
UsingEthernet:
a. SelectTCP/IP(Winsock)for“ConnectUsing”.
b. Typein192.169.13.31forHostAddress.
c. Changethe“PortNumber”to2332.
d. SelectOK.
3. Port Settings (serial only)
a. Changeorverifythesettings: 