User Guide

Universal Serial Bus (USB)
Rev 3.0B Feb.08 42
Installing the USB driver
1. Set the Port Type
VirtualEthernetportisthedefaultsettingfortheUSBport.If
youwanttoinstallthevirtualserialport,changetheUSBport
configurationusingthedirectionsabove.
2. Connect the PinPoint X to your
computer’s USB port
WhenyouconnectthePinPointXforthefirsttimetoaUSB
portonyourcomputer,Windowsshoulddetectanewdevice
andpromptyoutoinstallthedriver.
Note: Windows will see each port type as a different USB device and
will see every port on your computer separately. If you change the port
type on the PinPoint X or connect to a different USB port on your
computer or hub, Windows will see it as a new device.
Figure 6-2: Found New Hardware Wizard
a. Tostartthe installoftheUSBvirtualEtherne tdriver,
selectNo,notthistimeandclickNext.
b. SelectInstallfromalistofspecificlocationandclick
Next.