User Guide

PinPoint X HSDPA
57 20070914
Getting Immediate Reports Using RAP
YoucansetupthePinPointXtoreportimmediatelyreportthe
stateofaninputwhenitchangesbyusing*PPFLUSHONEVT.
Youwillalsoneed*PPINPUTEVT,inputeventreports,
enabledandaserverconfiguredforyourRAPreports.These
settingsareinthePinPointgroupinAceManager.
Figure 7-8: AceManager : PinPoint - *PPFUSHONEVT / *PPINPUTEVT
Power Modes and Information
ThePinPointXcanbe configuredtoswitchpowermodesin
responsetospecificevents,suchaswhenthevoltagetothe
modemdropsbelowaconfiguredthresholdorwhentheDTR
changes,inordertoconserveavehicleʹsbatterylife.Thestand‐
bystate,low‐powermode,willprevent
themodemfrom
drainingthebatterywhileallowingthemodemtoquickly
poweruptoregularoperationwhenitisneeded.
YoucanconfigureLowPowermodeusingAceManager.