User Guide

Data Communication and Host Modes
Rev 3.0B Feb.08 64
YoucanconfigureastringofATcommandstobesenttothe
PinPointXwhenitentersPassThruandotherPassThru
settings.
Figure 8-2: AceManager : PassThru
PassThruModeallowsonlyspecificATcommands.Some
ALEOScommandswillbeunavailablewhenthePinPointXis
inPassThrumode.Thecommandsusablealsodependheavily
onthemodemmodelnumber(foundonthelabelonthetopof
thePinPoint X).
Note: Some internal hardware requires upwards of 20 seconds
before AT commands can be entered, so be patient if there seems to
be no response to AT commands.
Te l n e t M o d e
InAceManageryoucanconfigureTelnetoperation.
Figure 8-3: AceManager : S0
IfyouneedtochangetheportforTelnet(forexample,you
havethedefaultportblockedonyourfirewall),theoptionis
ontheOthertab.Thedefaulttelnetportis2332.Youcanalso
changetheTelnettimeout,iftheconnectionisidle,default2
minutes.