User Guide

IP Manager
Rev 3.0B Feb.08 79
Note: The fully qualified domain name of your PinPoint X will be a
subdomain of the domain used by the IP Manager server.
Using IP Manager with your
PinPoint X
ToallowyourSierraWirelessAirLinkmodemtobeaddressed
byname,themodemneedstohaveaminimumofthree
elementsconfigured.Youcanalsoconfigureaseconddynamic
serverasabackup,secondary,oralternateserver.
InAceManager,selectDynamicIP.
Figure 9-1: AceManager: Dynamic IP
• *MODEMNAME:Thenameyouwantforthemodem.
Therearesomerestrictionslistedbelowforthemodem
name.
• *DOMAIN:Thedomainnametobeusedbythemodem.
Thisisthedomainnameoftheserverconfiguredfor
*IPMANAGER1.
• *IPMANAGER1:TheIPaddressordomainnameofthe
dynamicDNSserverwhichisrunningIPManager.
• *IPMANAGER2:Thesecondaryserverforthedomain.
Whileitisoptionaltohavetwoserversconfigured,itis
highlyrecommended.
Tip: You can use a domain name instead of the IP address for your
IP Manager servers if you have DNS set up in your PinPoint X.
• *IPMGRUPDATE1and *IPMGRUPDATE2:Howoften,
inminutes,youwanttheaddresssenttoIPManager.If
thisissettozero,themodemwillonlysendanupdateif