User Guide

Global Positioning System (GPS)
Rev 3.0B Feb.08 86
• NAD83
• NAD27
Before you Configure GPS
TodecidewhatconfigurationyouneedforyourPinPointX,
therearesomefundamentalconsiderationsyoushould
determine:
• Protocol:WhatistheGPSprotocolusedbyyourtracking
applicationandwhattypeofreportswillyouneed?
• Datum:Whatisthedatumsupportedbyyourtracking
application?
• DynamicIPAddress:WillyouneedDNSsupportto
handleadynamicIPaddressaccount?
Configuring the PinPoint X for
GPS
Thissectioncoversgeneralconfiguration.Configurationsfor
specificprotocolsarecoveredinlatersections.
Toconfigureyourmodem’sGPSsettings,youcanuseeither
AceManageroraterminalconnectiontoconfigurethemodem
usingATcommands. Theconfigurationexamplesinthis
chapteralluseAceManager.Mostofthesettings areinthe
group:PinPoint.