Satellite Radio User Manual

104
Configuration Parameters
Parameter Name Description Addr
Default
Value
Type Set Value
CW Parameters
cwfreqs
frequency for cw telemetry
180 800 special
cwamp
amplitude for cw telemetry
182 127 special
cwwpm
cw speed for cw telemetry
183 18 special
altidflags
for each port, bit=1 for radio to send id_string2 (0)
184 word, byte
C108 184 B (0…255) D
idlocflags
for each port, bit=1 for radio to append loc_string2 to id
(0)
185 word, byte
C108 185 B (0…255) D
idlocalfreq
frequency for repeater and remote base ID (if enabled)
186 1064 special
idlocalamp
amplitude for repeater and remote base ID
188 80 special
idlocalwpm
cw speed for ID to repeater and remote base
189 20 special
idlinkfreq
frequency for link ID
190 1064 special
idlinkamp
amplitude for link ID
192 40 special
idlinkwpm
cw speed for ID to links
193 24 special
Repeater port sounds with normal and radio specific values
nolnksnd
normal key up telemetry sound when nothing is linked
194 word, byte
C108 194 B (0…255) D
rnolnksnd[]
radio specific nolnksnd's
197 word, byte
C108 197 B (0…255) D
lnkintsnd
normal key up telemetry sound when some links active
221 word, byte
C108 221 B (0…255) D
rlnkintsnd[]
radio specific lnkintsnd's
224 word, byte
C108 224 B (0…255) D
lnkcardelsnd
normal key up telemetry sound with no link carrier delay
248 word, byte
C108 248 B (0…255) D
rlnkcardelsnd[]
radio specific lnkintsnd's
251 word, byte
C108 251 B (0…255) D
remmonsnd
normal key up telemetry sound when in remote monitor
mode
275 word, byte
C108 275 B (0…255) D
rremmonsnd[]
radio specific remmonsnd's
278 word, byte
C108 278 B (0…255) D
remmonlsnd
normal key up telemetry sound when in remote monitor
mode
302 word, byte
C108 302 B (0…255) D
rremmonlsnd[]
radio specific remmonsnd's
305 word, byte
C108 305 B (0…255) D
rbaseactsnd
added telemetry to repeater when remote base unkeys
329 word, byte
C108 329 B (0…255) D
rrbaseactsnd[]
radio specific rembaseactsnd's
332 word, byte
C108 332 B (0…255) D
Repeater port sounds which are globally defined only
timeoutsnd
sent when timeout is about to reset the repeater to Site
Normal
356 special
alarmsnd
sent when hardware alarm is triggered (not implemented)
359 special
Link port sounds
accesssnd
valid pr
efix received from same port (def: dial tone)
362 special
busysnd
valid prefix received, but controller busy (def: busy signal)
365 special
alertsnd
valid prefix and link is off/disconnected (def: +950Hz)
368 special
alert2snd
valid prefix and local is off/disconnected (i i @ def:
+950Hz)
371 special
lnkwrnsnd
function end telemetry when command blocked (def:
1300/1700Hz)
374 special
rbaselnksnd
added telemetry to links when remote base unkeys
377 word, byte
C108 377 B (0…255) D
rrbaselnksnd[]
radio specific rembaselnksnd's
380 word, byte
C108 380 B (0…255) D
fncmpsnd
function complete sound
404 word, byte
C108 404 B (0…255) D
progsnd
function parameter prompt sound (normally continuous
tone), not currently used
407 word, byte
C108 407 B (0…255) D
wrnsnd
warning sound for invalid parameter input
410 word, byte
C108 410 B (0…255) D
reordersnd
invalidated password code entered
413 word, byte
C108 413 B (0…255) D
cnfsnd
confirm tone for configuration command
416 word, byte
C108 416 B (0…255) D
snrmsnd
site normal function complete sound, not currently used
419 word, byte
C108 419 B (0…255) D