Operating instructions
12
VII. STOVE AND CHIMNEY MAINTENANCE.
At the end of each season, thoroughly clean the inside of
the firebox area including the area under the grate and ash
drawer. Vacuum all air passageways and the fan cover
screens. Check the door and window gaskets and replace
if necessary. (Make sure stove is cool.)
Replace the door gaskets on your Sierra stove every two or
three seasons. Repace the window gaskets only if you
need to replace the glasss. See your Sierra dealer for
replacement parts.
Care and cleaning of woodstove Glass - The window
glass on your Sierra woodstove is designed for high
temperature performance and will withstand normal
woodstove temperatures. However, like most glass, it will
break if struck with sufficient force, so be careful when
loading wood. You can break your glass by jamming alog
against it or by attempting to push a log intot eh fire with
the stove door. Never load your Sierra stove with
combustible materials. Even the smallest explosions in a
small airtight stove may blow out the glass.
Inspect the glass regularly for cracks or breaks. If you find
one, obtain a new glass from your dealer or SIERRA.
Always use the fiberglass window gasket supplied with the
replacement glass.
Keep a Hotter Fire for Cleaner Glass - Heare are nine
hints for keeping your window glass as clean as possible.
1. A hotter fire near the window keeps it clean (don’t
expect any stove window to stay perfectly clean)
2. Add a log or two frequently, avoid a smoldering fire.
3. Move burning logs to window area, add new logs
behind.
4. Encourage a hot burn when adding logs.
5. Use dryer wood - green wood stains glass.
6. To celan window when dirty, burn a hot fire.
7. Or use a dam p rag to wipe window, but be sure to avoid
a steam burn.
8. Keep air intakes clean for a good wash of air.
9. Stir ashes as little as possible.
BLOWER MAINTENANCE
Regularly check the fan covers for dust buildup and
remove any present. Also be sure to check the power cord
for any signs of wear or damage. Have the cord replaced
by a qualified electrician if necessary.