Switch User Manual

IM-215 Rev-A.1 Series Innova-Switch™ Page 23 of 42
FIGURE 8.0 Innova-Switch™ ELECTRONICS
4.2.3 Alternate Operation (Field Selectable)
The relay logic may be reversed by moving the J-2 jumper to position A(1-2). (Refer
to Figure 8.0.)
RELAY
RED GREEN RELAY CONTACT
SENSOR STATUS LED LED COIL STATUS STATUS
o NC
No Flow or Flow Below Set Point ON OFF Deactivated
o NO
o NC
Flow or Flow Above Set Point OFF ON Activated
o NO