User manual
USER MANUAL
Page
11
Quick Start Guide
• Be certain that the battery is fully charged and properly installed in the camera;
• Power on the RAZ-IR thermal camera;
• Flip open the top half of the RAZ-IR thermal camera to view the display screen;
• Wait for 15 seconds and remove the lens cap;
• Non-uniformity Correction (NUC) is performed automatically when the camera is
powered on;
• Point the RAZ-IR thermal camera at any object to be analyzed;
• Use the lens focal ring and adjust the focus to get a clear image on the display;
• Press the
•
Key for three seconds to switch between Auto and Manual modes;
• Press
•
Key and then adjust brightness, contrast and color palette, if necessary;
• Press
the
◄
Key
to display and view a visual image of the target;
• Press the ◄ Key to return to the live thermal image;
• Press the OK Key to freeze and capture the live image;
• Press the OK Key again to save and store the frozen image;
• Press the C Key to resume live imaging.