User manual

USER MANUAL
Page 13
Introduction to Selection Keys
KEYS FUNCTION
On/ Off
Power on/off
M
To enter menus and sub-menus
To select a sub-menu or option under a menu
To confirm parameter setup
To toggle between four spots or four areas for spot or area analysis
▲
Up Arrow Key
To toggle between sub-menus under menu
To turn on or turn off laser locator
▼
Down Arrow Key
To toggle between sub-menus under menu
To 2× zoom in the live thermal image
◄
Left Arrow Key
To return to the parent menu
To change value of parameters
To switch between infrared image and visual image, Pro model only
►
Right Arrow Key
To enter sub-menus under menu
To change value of parameters
To perform background modification when pressed simultaneously with C
Key
OK
To select one sub-menu or option under menu
To freeze and store live image
To record voice annotation, replay voice annotation after recording and
bring up the recording menu when re-recording
To replay a selected image after preview
To switch between infrared image and visual image when replaying the
stored images
C
To cancel one sub-menu or option under menu
To exit menu
To perform non-uniformity calibration (when not in menu mode)
To perform background modification when pressed simultaneously with
the ► Key
•
When menu is not being displayed, depress for three seconds to switch
between Auto and Manual mode
When menu is not being displayed, press and release to bring up the
temperature measurement setup menu