User manual

USER MANUAL

Page

• In Auto Mode, if you highlight the upper or lower limits of the palette and press ▲

and ▼ Keys to change its value, the mode will change to Manual Mode

automatically.

• Press either OK or C Keys to confirm the selection.

Static Temperature Measurement

• Hold the camera as steady as possible with the image in focus. Press the OK Key

to freeze the live image. The word “Frozen” will appear on the screen to indicate the

current status of the image.

• Press any Key except OK to cancel this operation, if necessary.

• Press the ▲, ▼, ◄ or ► Keys to position the center cursor.

• The value displayed at the top of the screen shows the temperature of the moving

cursor.

• Imaging performance varies based upon temperature ranges and palettes selected.

• Setting the temperature range is the same as explained in the dynamic real time

temperature measurement section above.

Main Menu Introduction

• This section covers the main menu options and their sub-menus. The main menu is

brought up on the screen by pressing the M Key.

• The menus can be navigated by pressing the▲, ▼, ◄ or ► Keys and the

highlighted option is confirmed by pressing the M or OK Keys.

• Setup Analysis: Allows for the camera functions to be set.

• Setup Target: Allows for temperature measurement parameters to be set.

• Setup Time: Allows for the date and time to be set.

• Setup Default: Restore the factory configured value of all the parameters.

• File Browse: To preview and open saved images.

• File Delete All: To delete all of the saved images.