User manual
USER MANUAL
Page
17
• Analysis Spot: Allows up to four spot measurements to take place on saved or
frozen images.
• Analysis Line: Allows line profile measurement to take place on saved or frozen
images
• Analysis Area: Allows up to four rectangular area measurements to take place on
saved or frozen images, displaying maximum, minimum and mean temperatures.
• Analysis Isotherm: Allows for an isotherm to be placed on live, saved or frozen
images.
• To exit the menu system at any time and return to the image press C Key.
Switching Between Infrared Image and Visual Image
• You can toggle between the infrared image and visual image
• When there is no menu on display screen, press the ◄ Key to switch between
thermal and visual images.
• For replayed images, press the OK Key to switch between infrared image and visual
image.
Adjusting the Exposure and Gain of the Visual Image
• There are two modes available - Auto Mode and Manual Mode.
• Press
•
Key to switch between Auto Mode and Manual Mode. The current mode is
displayed in the left corner at the bottom of the display screen.
• In Manual Mode, exposure control (EC) and gain control (GC) is available on the
screen.
• Press the ▲ or ▼Keys to adjust the value of the highlighted item and press ►
Key to shift between EC and GC.
• In Auto mode, EC and GC will be defined automatically by the system.
Laser Locator
• To turn on the laser locator option, press the M Key to display the main menu. Press
the ▲, ▼, ◄
or
► Keys to highlight the “Setup Analysis” option. Select by
pressing the M or OK Keys.
• Under the heading named “Laser”, you can toggle between “on” and “off” by pressing
the ◄ and ► Keys. The selection “on” is confirmed by pressing the M or OK Keys.
• When there is no menu on the display screen, press the ▲ Key to turn the laser on