User manual

USER MANUAL

Page

• Press the ► Key to go to the Analysis option, then select by pressing the M or OK

Keys.

• Press the ▲

and

▼ Keys to switch between each option. Press the ◄

► Keys

to change the setting of the highlighted option.

• The following options are selectable: Iso Color, Mul Spot/Area, Area, Menu Trans,

Data Bkgrd, Laser, Audio Alarm, Voice Annotat, Temp Unit and Mean.

• Iso Color: 3 colors are available, black, white and green for the isotherm.

• Mul Spot/Area: Used to toggle between one and four spots/areas. Four moveable

spots and areas are available for simultaneous analysis by setting “on”. Only one spot

and no area is used in the “off” position.

• Area: To activate the four moveable areas to display the Maximum, Mean or

Minimum temperatures under area analysis.

• Menu Trans: 5 levels of transparency are available for the menu display.