User manual
USER MANUAL
Page
22
• Data Bkgrd: To turn on or off the data background. If Data Bkgrd is set to “on”, the
data on the image will be highlighted by a black background so that the data is easy
to read.
• Laser: To turn on or off the laser locator when viewing live images.
• Audio Alarm: To turn on or off the audio alarm for temperatures exceeding the preset
value.
• Voice Annotat: To enable or disable voice annotation when saving live images.
• Temp Unit: To switch between Celsius and Fahrenheit.
• Mean: To define the frozen image as the mean value of different frames.
• Press the M or OK Keys to confirm the parameter setting and to exit the “Setup
Analysis” menu.
• Press the C Key to cancel the parameter setting and to exit the “Setup Analysis”
menu. Press the C Key again to exit the main menu.
Target Sub-menu
• Press the M or ► Keys to enter the “Setup” option. Press the ▼ Key to highlight
and select “Target”.
Press the M or OK Key to enter the “Target Setup” option.
• The setup parameters menu will then appear. Press ▲
or
▼ Keys to move between
each setting, then press the ◄
or
► Keys to change the values.