User manual

USER MANUAL

Page

• The setup parameters menu will be displayed. Press ▲

and

▼ Keys to move

between each setting, then press the ◄

► Keys to alter the values.

• Press the M or OK Keys to confirm the changes for the “Time Setup” menu.

• Press the C Key to exit the “Time Setup” menu.

• Press the C Key again to return to the live image.

Note:

• Time refreshes in real time when the camera is operating. Resetting the

parameters under the menu above interrupts refreshing. After setup, time goes

on to refresh in real time.

• Resetting the time is essential when it takes more than half an hour to replace

the battery.

Default Sub-menu

• The camera settings chosen by the operator remain the same after powering off and

powering on the camera, but they can be restored back to the manufacturer’s default

settings at any time, as explained below.

• Press the M or ► Keys to enter the “Setup” option. Press the ▼ Key to highlight

and select “Default”.